GREEN LIGHTING TECHNOLOGY CO.,LTD
Instruction:
The NEW Multi-functional Safety Led Flare Warning Light developed by GLT is based on the investigation of car accident cases
after vehicle failure for many years, and after consulting the opinions of relevant experts and professionals, it has been developed
after more than a year of hard work, and is a modern warning boutique for faulty vehicles to avoid accidental accidents. Specially
for underground mining vehicle working sites.
This LED flare warning light is powered by high energy Li-ion battery 18650, LED flash controlled by computer IC chip, there are two
parts of lighting for use, the surrounding flare warning lights RGB and middle white lights. Two lighting sections, each controlled by
2 switch buttons, and according to the user's needs to set different matching lighting mode. Easy to use, complete functions, remarkable effect.
This product has a strong high beam flashing warning function, even in the dark night, heavy rain, fog weather, can also provide obvious
warning effect, to avoid the traditional warning signs, due to bad weather or improper placement Angle and can not effectively provide the warning effect shortcomings.
3.The product shell is made of high strength transparent engineering plastic injection molding, outsourcing TPE thermoplastic
elastic plastic, anti-rolling, waterproof, dust proof, oil resistant, corrosion resistant.
4.Yellow light is extremely penetrating in the fog, and the product also has yellow and blue warning lights in addition to red warning lights.1.Safer and ecologically better for our environment than flame style emergency road flares. No spark, open flame , fumes or
toxic chemicals are produced when using the led road flare.
2.Shock resistant construction makes the flare very durable and can withstand the impact of roadside traffic. Can even be run over
by a truck and still operate. Used by fire, police and other emergency responders.
3.Lie flat or on its edge depending on your reference. Place on the road, at construction sites, vehicle bumper or other surface,
and anywhere needing emergency signaling.
4.The Led road flare is waterproof so it may be used for marine applications and safely in wet environments, including submerged
to a depth of 10 meters. Will float unless secured.
5.Using the magnet on the back, attach to any magnetic metal surface. Place on a vehicle, fence or other metal surface.NOTE: It is not recommended that you disassemble the flare. If it is not reassembled correctly it may result in failure
of the waterproof seal and damage to the unit.
Specification
| GL-WF02 | Side warning lights | Center lighting lights |
| Light source | 16 leds f5 RGB | 6 white lights |
| Light current | 7mA*16 leds=112mA | 60mA - 120mA |
| Light modes | Rotate - Double blink - Single blink - Alternate - SOS - Solid on (low) - Solid on (high) - Red/blue alternate - Red/green alternate - Blue/green alternate | Weak - Strong |
| Wave length | R: 630 / G: 525 / B:465 | |
| Luminous intensity | R: 1500cd / G: 8000cd / B: 4000cd | 30lum - 70lum |
| Brightness | 1500Lux | |
| Light power | 0.08W | 0.08W - 0.3W |
| Working time | 100hrs | 35hrs - 16hrs |
| Materials | PC + silicone | |
| Storage temperature | -40~+60 ℃ | |
| Rated voltage | 3.7V | |
| Battery capacity | 2200mAh rechargeable Li-Ion battery | |
| Battery cycles | 1200 Cycles | |
| Dimension | 105mm(Diameter)*39mm(Height) | |
| Charging current | 1.5A | |
| Charging time | 2hrs | |
| Waterproof grade | IP68 | |
Applications
Widely used:
1. Damaged vehicle traffic warning;
2. Police road planning signs;
3. Surface buoys and maritime salvage signs;
4. Used for identification of emergency vehicles, such as ambulances, helicopter landing area identification;
5. Heavy vehicle transport warning;
6. Rescue operation signs;
7. Emergency or temporary runway signs;
8. Campsite or hiking trail signs;
9. Field lighting;
10. Underground mining harsh environments;
Company Introduction
GREEN LIGHTING pay attention to the innovation and development of high performance and high quality mining cap lamps.
We have lots of intelligent and multi-functional mining cap lamps for client's choose, and we can also supply OEM&ODM products according client's requirements. GREEN LIGHTING assumes to offer most competitive price with good quality and punctual delivery to satisfy our valued customers. Reasonable price,
reputation innovation, high-quality service, strict quality control processing make us approved by global customers.
*Top quality material
1) CREE led: advanced cree led
2) Germany Bayer PC material make the lamps durable, feel good3) Panasonic or ATL battery: imported from Japan, it is applied in Apple notebook
*R & D
1) GREEN LIGHTING has built a team of 10 qualified engineers to service all the customers with products development, innovation, solution and technical assistant.
2) Every year we invest 10% annual turnover in our R&D.
FAQ
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What is the lead time?
A: Samples order needs 3-7days, bulk order production time needs 20-35 days.
Q3. How to make this payment?
A: TT, Paypal, Western Union.
Q4. Do you offer guarantee for the products?
A: Yes, we offer one year guarantee for the products.
Q5. Do you accept OEM/ODM?
A: Yes, it’s available.
Q6. Could I put my own logo on the products?
A: Sure, your logo can be put on every lamp outer case, either by laser, or by mold.